Weigh Cell SW-WD-FS
The SW-WD-FS Weigh Cell series covers the weighing range up to 2,000 g. They have been specifically designed as compact sensor components, meaning they are especially suited for installation into multilane applications and everywhere where small frame sizes are demanded. By using a special construction, all Weigh Cells are suitable for Wash Down applications IP69K.
Weighing range up to 2,000 g
As a ready-to-connect installation component – in combination with a separate electronic system – the Weigh Cell supplies final weight values as a standard feature via a CAN, RS 422, Profibus DP, Profinet IO, Ethernet/IP or EtherCAT interface.
The integrated software filters can be configured in many ways, enabling optimal adaptation of the weighing system to the respective ambient conditions. The Weigh Cells extensive command set facilitates simplified control engineering integration. Complemented by a variety of options, the Weigh Cell can also fulfill very specific requirements.
The Active Vibration Compensation (AVC) can be added as an option.
You need an individual solution? Please contact us.
- Weighing range up to 2,000 g , covered by 2 models
- Additive dead load range up to 1,000 g
- Slim construction in stainless steel housing
- IP69K Wash Down with separate
- electronic box
- Integrated Active Vibration Compensation,
- AVC (optional)
- Interface 1: CAN, RS 422, Profibus DP,
- Profinet IO, Ethernet/IP, EtherCAT
- Interface 2: RS 232 for service and
- Sampling rate 1 ms
10: RS 422 instead of CAN interface
11: Bus operation (standard)
12: Higher display resolution
13: Binary I/O channels (standard)
14: Filling algorithm
19: Active Vibration Compensation (AVC)
25: Dead load compensation
35: Profibus DP instead of CAN interface
36: Ethernet/IP instead of CAN interface
37: Profinet IO instead of CAN interface
38: EtherCAT instead of CAN interface