The EC-FS-EX Weigh Cell series covers a weighing range up to 15 kg. They have been speciﬁcally designed as a compact sensor component and are especially suited for installation in ﬁlling and packaging machines. Due to the special design, the Weigh Cells are also suited for use in areas at risk of explosion.
They comply with the type of protection EX II 3 D Ex tc IIIB T100 °C Dc and can be used in zone 22 in environments with non-conductive dust.
System-induced active self-damping guarantees the shortest possible measuring times while maintaining the highest resolution.
As a ready-for-connection installation component, the Weigh Cell already supplies ﬁnal weight values via a CAN interface as a standard feature. The integrated software ﬁlters can be conﬁgured in many ways and thus allow optimal adaptation of the weighing system to the relevant local conditions. The Weigh Cells extensive command set enables easy control engineering integration. Supplemented with a large number of options, the Weigh Cells can also meet very speciﬁc requirements.
|Max. weighing range (g)||15,000|
|Display value (g)||0.02|
|Max. dead load range (g)||15,000|
|IP (protection class)||65|
- Weighing range up to 15 kg, covered by 4 models
- Additive dead load range up to 15 kg
- Stainless steel housing
- Interface 1: CAN
- Interface 2: RS 232 for service and con-figuration
- Sampling rate 1 ms
12: Higher display resolution
- Filling and packing machines
|Type||Weighing Range||Load Range||Display Value|
|EC-3000-3-FS-EX||1,500 g||8,500 g||0.02 g|
|EC-4000-3-FS-EX||3,750 g||15,000 g||0.05 g|
|EC-4000-2-FS-EX||7,500 g||15,000 g||0.1 g|
|EC-4000-1-FS-EX||15,000 g||15,000 g||0.2 g|